Skip to content

Roller shutters in Saint-Jeannet: the workshop is next door

Saint-Jeannet and La Gaude are neighbours: our workshop is just a few minutes from the village. This is the commune where local manufacturing shows most clearly. A measurement taken in the morning goes into production the same week, and the fitter who installs it does not have to cross the department to get here.

A hillside village where no two openings are alike

Beneath the Baou, almost nothing is square: irregular lintels, reveals that narrow towards the top, stone walls 50 cm thick. A shutter bought in a standard size never sits well in openings like these; it has to be made for them. Our roller shutters are built to the dimensions recorded on site, guide rails included, which avoids the side gaps that let daylight through and eventually pull the curtain out of its guides.

The narrow streets of the old village also raise a question of access. Because the components arrive finished and cut to the right length, handling is kept to a minimum and less time is spent on site.

Wind, exposure and what lasts

On houses exposed to the westerly wind, it is the ancillary parts that wear first: brush seals, curtain fixings, end stops. These are the parts we remake most often, long before a complete shutter needs replacing. An aluminium curtain with foam-injected slats stays more stable than PVC across wide openings, and it can be lacquered to match the colour of the window frames.

For the summer months, roller insect screens fit into the same opening as the shutter, and roller garage doors replace a swing-out garage door wherever there is not enough room for it to open.

A short supply chain, without the slogan

We manufacture, we supply, and installation is carried out by an approved fitter from the area, often someone who has been working with the workshop for years. You can read our 12 customer reviews: nine of the twelve come from trade customers, and they are the ones who judge the whole chain, from the measurement to the parcel. To understand how the workshop operates, see our workshop.

Are you a joiner, blind specialist or installer?

We supply trade customers working in Saint-Jeannet and the surrounding area directly: pricing at the time of order, made-to-measure production and a single point of contact at the workshop. Ask us for our trade terms.

Controlling light without shutting the room

At the foot of the Baou, there is no arguing with the sun: it comes in strongly, early and for a long time. The instinct is to lower the shutter, but a conventional roller shutter can only do two things, open or closed. In between, you lose either the light or the coolness.

That is exactly what the shutter with adjustable slats solves: the slats pivot, letting light and air through while cutting out direct sunlight and keeping the view. In a south-facing living room or an exposed child’s bedroom, the difference is measured in degrees as much as in comfort.

Motorising without chasing the walls

In stone village houses, running a power supply to every window means cutting channels into the walls, making good the render and spreading dust through the whole house. Radio motorisation does away with the control cable: the switch can be placed wherever you like, with no wired connection to the motor.

When even powering the motor is a problem, solar motorisation settles the matter: the panel powers the shutter, and no connection to the electrical consumer unit is required. It is often the only sensible solution on a façade you do not want to open up again.

Insect screens on the edge of the garrigue

The price of mild nights here is the insects that rise from the valley as soon as dusk falls. Our made-to-measure insect screens come in a vertical version for windows and a side-opening version for French windows, with an ultra-flat threshold that does not get in the way as you walk through.

Brush guide rails close off the sides, which is where insects get in when a screen fits poorly, and one or two seals limit intrusion at the roller. As the workshop is at La Gaude, measuring and delivery can be done within the day.

The terrace as a room in its own right

With the climate of the hinterland, a terrace can be used from March to November, provided it is covered. An awning meets everyday needs: movable shade, retracted when the wind comes down from the Baou. A bioclimatic pergola with adjustable louvres goes further, remaining usable in the rain as well as in full sun.

Both can be ordered from the same survey and in the same colour as the house’s shutters and doors. On a village façade, that consistency of colour saves you from having to justify three different shades on the same wall.

Frequently asked questions

Do you install shutters in Saint-Jeannet?

We manufacture and we supply. Installation is carried out by an approved fitter from your area, whom we introduce to you because they already work with our workshop. One product, two contacts who know each other.

Can a shutter be replaced without changing the window?

Yes, in the vast majority of cases. A tunnel box or a monobloc shutter fits into the existing structure. It is the measurement taken on site that determines the solution, not a catalogue.

How long does a roller shutter last?

The curtain and the box often last more than twenty years. What wears out first are the brush seals, the curtain fixings and the motor, parts that we remake or replace individually without changing the whole unit.

Around Saint-Jeannet

We also supply projects in Vence, Cagnes-sur-Mer and Nice.

Let’s talk about your project

Describe your opening and we will reply with a costed solution: request your quote, or use the contact page if you would rather explain your situation before getting a price.