Buying from a roller shutter manufacturer at La Gaude, rather than from a production centre at the other end of the country, is not about local patriotism. It changes some very material things: the precision of the dimensions, the finishes you can get, how the unexpected is dealt with, and the life of the product after fitting. Here they are, without detours.
Making them here
Our workshop is at La Gaude (06610), on the slopes above the lower Var valley. Saint-Laurent-du-Var and Cagnes-sur-Mer are just below, Vence above, Nice and the Carros business parks a short distance away. A fitter coming to load, a private owner who wants to see a box profile for real, a joiner missing one part: nobody has to organise a shipment. The main consequence is not the distance itself, though, it is the length of the chain. The survey reaches the people who make the thing, a technical question is settled by one call, a correction is dealt with in the workshop.
Nothing gets lost between two middlemen.
Made to size or standard sizes: the difference on site
A large share of the shutters sold in France come off production lines working in dimensional steps. The product approaches your opening; it does not correspond to it. On site, the gap is paid for.
- A gap to fill with trims, packers and sealant. It shows, and it lets air through.
- Daylight lost, because the size has to drop a step to fit inside the reveal: less useful glass, a darker room.
- A box you have to accept, whose height does not match the lintel and which projects more than it needs to.
- Adjustments on site: the fitter cuts, adapts, compensates. The finish becomes a matter of individual dexterity.
Manufacturing to the millimetre changes the nature of the work on site: the unit goes into its opening, the rails come up plumb, the curtain covers the opening exactly. The fitter fits rather than improvises. That holds for ordinary cases as much as for the configurations a production run refuses: a trapezoid, an arch, a reveal that is not parallel, an irregular stone wall, a very wide opening. Our VT40, VT50 and VTEX50 ranges, the VM43 and VM55 monoblocs, Rolhux, Rolhptimo and Vision+ are built to the dimensions surveyed, not to a grid of sizes.
| Criterion | Standard sizes | Made to measure, locally |
|---|---|---|
| Fit to the opening | Approximate, gaps to fill | To the dimensions surveyed |
| Colours and finishes | A narrow catalogue | Particular colours and wood effects achievable |
| Transport | Long distance, transhipment | A short journey, little handling |
| A wrong dimension or damage | Return to a distant supplier | Put right at the workshop directly |
| Spare parts | Through a chain of intermediaries | Contact with the people who made it |
| Who you deal with | Varies at each stage | The same people from survey to after-sales |
We are often asked whether made to measure works out more expensive. The honest comparison is made with fitting and finishing included. The question of time works the same way: the lead time on a made-to-measure shutter depends on the colour, the size and the motor chosen, not on a figure posted in advance.
Colours, shapes and awkward cases
In the Alpes-Maritimes, colour requests are rarely neutral. Lime render in the hinterland, a building that fixed a precise colour at its general meeting, existing joinery to be respected, a wood effect for a bastide: a narrow catalogue blocks that kind of project quickly. We treat these requests as ordinary orders, including matching the appearance of a shutter already in place when only part of a façade is being replaced. The other families we make follow the same logic: roller garage doors and made-to-measure roller insect screens, produced here since 2011 like the shutters. Awnings, interior blinds and bioclimatic pergolas appear in our catalogue without coming out of our workshop: we supply them, we do not make them. Better to say so plainly — it is what gives weight to the rest.
A particular colour is not a favour.
What happens when something goes wrong
A roller shutter is a long assembly, fragile at the corners. The more it travels and the more lorries it changes, the more the risks pile up: a box marked by a strap, a twisted rail, a scratched slat. Damage found on delivery means a fitter standing idle and a job postponed.
A short journey does not remove the risk, but it reduces it sharply.
Then comes the unexpected, which no survey avoids entirely: an opening that turns out different once the old shutter is off, a substrate that demands another fixing. The real question is not preventing it but knowing what it costs in time. A survey carried out in the right order rules out most of those surprises already, and our method for surveying a renovation lists the points to check before ordering.
A product corrected in the workshop goes back out quickly. The same product sent back hundreds of kilometres waits its turn in a production queue. The reasoning holds years later too, for a curtain remade to the same dimensions, a bottom slat, a set of rails or a motor replaced with a compatible model: because we made it, we know what was delivered. Somfy io-homecontrol, RTS, RS 100, Oximo and Altus motors and CAME radio are references we follow, which simplifies later replacements. We set out that compatibility reasoning in our piece on the Somfy io motor.
Private customers and the trade: two separate routes
Our trade is manufacturing, not fitting. For a private customer, we study the project, confirm feasibility, produce to size, and point you towards an approved installer in your area who takes the measurements and fits. You get a product made close to home and a fitter who knows our profiles. The full range is set out on our made-to-size roller shutters page.
Joiners, blind specialists, installers and main contractors work with the workshop direct. That means an opinion on feasibility before they commit to their own customer, a particular colour obtained without endless negotiation, a loading point inside the department rather than a wait for a carrier, and somebody on the phone who knows the product without having to open a file. For a professional, that responsiveness becomes an argument in front of their own clients. The criteria worth reviewing before choosing a roller shutter supplier apply to us as much as to any workshop in the department.
A manufacturer at La Gaude still picks up the phone on a Friday afternoon. That counts for more than people say.
Three questions about buying direct
Do you sell to private customers?
We study and manufacture for them, then point them to an approved installer in their area for measuring and fitting. That way the product is made to the right size and fitted by somebody who knows it.
Is a colour outside the catalogue possible?
Yes, particular colours and wood-effect finishes included. Feasibility depends on the range and the profile chosen.
What area do you cover?
The whole of the Alpes-Maritimes, from the coast to the hinterland. We also supply trade customers based further out across the department.
Two routes, depending on who you are
Take the dimensions of your openings before anything else: that is what makes an answer useful. If you are a private owner, send your project through the made-to-measure quotation form and we will point you to an approved installer. If you are a joiner, blind specialist or installer, open your working account with the workshop the same way, and say so when you write. A technical question before you commit is best put to the workshop directly.
Our page on roller shutters at La Gaude sets out what we make in the village, and you can also read about our workshop.


